If you're new here, you may want to subscribe to my RSS feed. Thanks for visiting!

On April 1st 2009, Empire Lighting Resources was approved as a Participating Independent Contractor in FPL’s Business Lighting Program.

As an approved Independent Participating Contractor, Empire Lighting Resources can offer upfront discounts to customers for permanent retrofits up to the incentive amount allowed by FPL which meet their requirements.

Empire Lighting Resources can be contacted for a free energy efficiency audit to determine if your company’s retrofit qualifies for the FPL incentives offered.

Originally posted 2009-06-03 12:58:00. Republished by Blog Post Promoter

color20logo

before-1

Before

after-1

After

Empire Lighting Resources, has completed the lighting retrofit for the 360,000 s.f. Pepperidge Farm, Inc. manufacturing plant located in Lakeland, FL. The energy savings initiative was the first for Pepperidge Farm which has nine production facilities throughout the United States.

The production area lighting consisted of 55% 458 watt high pressure sodium fixtures, 35% 455 watt metal halide and 10% 8′ fluorescent strip fixtures. All HID fixtures were replaced with 224 watt enclosed  Hi-Bay fixtures utilizing Empire Lighting Resources VIZ-A-LITE High Vision fluorescent lamps. All existing 75 watt 8′ T12 cool white fluorescent lamps using 30 watt magnetic ballasts were replaced with 59 watt 8′ T8 VIZ-A-LITE High Vision lamps using normal ballast factor  electronic ballasts. The result, an average of 52% energy savings per fixture and additionally, dramatic heat load reduction, while providing a tremendous improvement in light quality due to the increased CRI (color rendering index) caused by switching from the yellow tinted low CRI high pressure sodium lamps to the high CRI VIZ-A-LITE  lamps.

In the office areas throughout the facility, all existing 2, 3, and 4 lamp cool white T12 fixtures as well as the 3 and 4 lamp T8 fixtures were retrofitted to 2 lamp T8 fixtures using VIZ-A-LITE High Vision lamps, enhanced aluminum reflectors and normal ballast factor electronic ballasts. The result, an average energy savings of 65% with again, a much improved quality of light. Additionally, all appropriate areas of the plant had occupancy sensors installed to provide additional energy savings.

Estimated annual savings in reduced energy demand will exceed $116,000 with an additional $73,000 in EPACT tax credits.

Pepperidge Farm will reduce CO2 emissions by 1,412 tons per year as well as a reduction of over 5.3 tons in SO2. This is the environmental equivalent of planting 224 acres of trees or removing 197 automobiles from the road, saving of over 100,813 gallons of gasoline and reducing oil demand by 2,400 barrels of oil.

Originally posted 2009-10-19 12:09:57. Republished by Blog Post Promoter

Alro Metal Services was seeking ways to improve production while lowering costs. Empire Lighting Resources responded by de-lamping their 4-lamp 4′ T12 fixtures with 2 T12 Viz-A-Lite High Vision fluorescents which reduced energy consumption by 50%. We also replaced the 455 watt metal halide fixtures in their production/warehouse areas with 192 watt hi-bay T8 fluorescent reflector fixtures and Viz-A-Lite High Vision fluorescent lamps. Yearly savings derived from these changes will allow Alro Metal Services an energy savings of almost $10,000 per year.

Originally posted 2009-05-02 06:35:31. Republished by Blog Post Promoter

Author: Amit Chakraborty

Commercial lighting has been a growth industry for many years and many consumers are turning to commercial lighting products. Because of the need for heavy-duty, reliable commercial lighting fixtures, many lighting companies around the world are at the forefront of light-emission technology. Commercial lights are used in many applications, ranging from high-wattage flood and spotlights to fluorescent bulbs used in schools and health care facilities.

Lighting fixtures come in all shapes and sizes. Large fixtures are most typically reserved for areas with extremely high ceilings and large floor areas. Gymnasiums are one very simple example. The commercial ceiling lights that are needed in such facilities must be extremely long-lasting, and it must be durable. Changing the bulbs on such lights is a daunting task, and must often be undertaken professionally.

Heat lamps are also a very popular form of commercial lighting. Whether they are being used in a greenhouse or a fast food restaurant, heat lamps are essential lighting fixtures and commercial lighting fixtures, without which some segments of the economy would not be possible at their current scale.

Commercial landscape lighting is another type of everyday commercial lighting. These outdoor lights provide both a safe and aesthetic environment for homes, businesses, and even school campuses. Without proper lighting, it would be extremely difficult to see dangers lurking, whether in the form of other people, animals, or even weather-related hazards.

Regardless of the type of commercial lighting that is required, there’s always a lamp, or a bulb that is adequate to the task. New technologies are being developed every day. Energy bills are being reduced dramatically by compact fluorescent bulbs, led lights, and low-emission lights. Light bulbs now last thousands of times longer than their original ancestors, and that is thanks to the tireless, and often thankless, work of the commercial lighting industry.

Article Source: http://www.articlesbase.com/landscaping-articles/all-you-need-to-know-about-commercial-lighting-582540.html

About the Author

Jordan Travis writes about commercial lighting industry. Read more about commercial lighting at www.ibuylights.com.

Originally posted 2011-06-05 17:06:09. Republished by Blog Post Promoter

Author: Kimberly Quang

The quality of the commercial lighting products that you sell your clients matters now more than it ever has. Because we have entered a period of recession, companies that spend money on replacements or upgrades intend to stretch their investment as far as it can possibly go. Sometimes your clients may have already done a bit of homework themselves on the type of commercial lighting products they need, and may offer to purchase the equipment and pay you for the labor to install them. This is all well and good if they have sourced their products well, perhaps through our channel or one of our affiliate manufacturing distributors. However, if they are planning on buying imported commercial lighting products, or going down to the hardware store to obtain retail grade materials at a lower cost, it would serve their long term interests if you advised them against such a course of action.

There are problems associated with both foreign-manufactured commercial lighting products and with retail commercial lighting products. Foreign-made products may claim to be commercial grade in quality, but you have no way of determining if this is really the case. Foreign governments have different technical and quality assurance standards than our own, and even if the fixture is compatible with US-made technology, you have no guarantee of quality assurance. When the product fails, there is no way to enforce the warranty on what you have worked so hard to install-if there is a warranty on the product at all. This will further stagnate your client’s revenue stream with replacement costs and additional labor. This is not the way to recession proof your client’s business.

It is far better to invest up front in commercial lighting products that will do what the manufacturer promises they will do. This level of performance and guarantee is best obtained through products made in the U.S.A by reputable American manufacturers who even now are working to improve existing light fixture technology for greater ergonomics, energy savings, safety, and aesthetics. This is why Residential Landscape Lighting and Design represents only those manufactures who headquarter in the United States AND manufacture their products here in the United States.

When you can offer your clients the best products in the world of commercial lighting backed up by warranties in writing, you can also promise them a number of tangible financial returns on their investment through the proper installation and use of these products.

Improved Safety Results from U.S.-manufactured outdoor lighting fixtures.

Parking lots and parking garages are two places where people leaving work after dark are often attacked. They are also places where vandalism and vehicle burglaries frequently occur. Upgrading the lighting system in both of these locations with commercial lighting products that feature the latest in glare shielding, optical performance, and light directional control increases foot candle levels in these areas and simultaneously reduces light pollution into surrounding neighborhoods and streets.

Ergonomics

Better interior lighting improves ergonomics and often creates a more positive morale and motivated sense of production among the staff. Many factories are now using fluorescent lights with electronic ballasts that produce a high level of light and superior color rendering at 40% less. Fluorescent low bays are a favorite commercial lighting product for assembly line work because of the high CRI they offer. Larger facilities that need high bay lights can also benefit from HID fixtures with pulse start technology. Interior office lights and ceiling lights can also now be done with low voltage halogen, LED, and fluorescent fixtures that replace incandescent with more comfortable and controllable levels of light and more precise lighting effects.

ROI through Power Conservation

This last point brings us to our next: ROI through power conservation. The more efficient the commercial lighting products are, the faster they pay for themselves by saving on the electric bill month after month. An added bonus to this is that most energy efficient fixtures enjoy a very long lamp life, so they will certainly be around when the cost of purchasing them has been offset by subsequent savings. American made commercial lighting products are intended to put money back into your client’s pockets in this fashion and to contribute to nationwide efforts to develop more environmentally technology pursuant to reversing global climate change.

· LED Commercial Lights
· Metal Halide Fixtures
· High Pressure Sodium Fixtures
· Floodlight for Security and Landscape Lighting
· Wall Packs
· LED Office Lights
· LED Outdoor Lighting Fixtures
· Fluorescent Lighting Fixtures
· Parking Lot Lights and Lighting Poles
· Solar Powered Street Lights
· Security Lights and Motion Detectors
· Architectural Building Lights
· Sign Lights
· Commercial Low Bay Lights
· Light Control Systems
· Outdoor Accent Lighting
· Landscape Lights
· Sports Lighting
· Baseball Lights
· Soccer Lights
· Football Lights
· Volleyball Lights and Lighting Kits
· Tennis Court Lights and Lighting Kits
· Commercial Parking Garage Lights
· Warehouse High Bays
· Roadway and Highway Lights

Keep in mind too that we have a staff of trained experts who will answer any questions you have about commercial lighting products or help you find specific types of commercial lighting products from any number of manufacturing sources. We drop ship directly to your client’s location straight from the factory, and we offer turnkey installation services on selective items. Call us today to learn more about what we can do for you.

Article Source: http://www.articlesbase.com/business-articles/american-made-commercial-lighting-products-517785.html

About the Author
residential-landscape-design.com. Visit us online to learn more about Commercial Lighting Products and Commercial Lighting.

Originally posted 2011-04-07 06:54:59. Republished by Blog Post Promoter

by Craig DiLouie

The Energy Policy Act (EPAct) of 2005 created the Commercial Buildings Deduction (CBD), which established an accelerated tax deduction rewarding investment in energy-efficient interior lighting, HVAC/hot water systems and building envelope.Initially set to expire December 31, 2007 and then December 31, 2008, the CBD was recently extended by Congress to expire in five years: December 31, 2013.

The Deduction
A tax deduction is a cost subtracted from adjusted gross income when calculating taxable income; tax liability is not reduced dollar for dollar, as is the case with a tax credit, but instead in proportion to the taxpayer’s tax bracket.

Deducting the cost of a capital investment such as new lighting is not special. What is special about the CBD is the owner can potentially write off the entire cost of the new lighting in the tax year in which it is placed in service, instead of capitalized and depreciated or amortized over time. So it’s an accelerated tax deduction: If a cost item associated with installing new lighting is normally depreciated and claimed over a period of years, it can now be claimed in a single tax year.

 

Originally posted 2009-05-22 20:53:00. Republished by Blog Post Promoter

Empire Lighting Resources has completed the installation of energy efficient lighting at Unisex Salon 21 of  North Lauderdale, Florida.

By replacing the standard T8 fluorescents with VIZ-A-LITE High Vision lamps, Unisex Salon 21 will reduce their lighting energy costs by over 33%. In addition, the lighting upgrade has created a more pleasant atmosphere for their employees and customers.

Originally posted 2009-06-07 13:55:07. Republished by Blog Post Promoter

sansoneEmpire Lighting Resources recently completed upgrading the lighting at the corporate offices of Sansone Corporation in Deerfield Beach, Florida.By converting the existing four lamp fixtures using standard fluorescents with two energy-efficient VIZ-A-LITE High Vision fluorescents, ELR reduced the lighting energy consumption used by 50%, saving  Sansone Corporation almost $4,000.00 per year in electrical costs.

Originally posted 2009-06-05 12:37:59. Republished by Blog Post Promoter

Before

Before

After

After

Empire Lighting Resources recently completed upgrading the lighting at Regency Travel in Ft. Lauderdale, Florida. By converting the existing four lamp T12 fixtures using standard fluorescents with two energy-efficient VIZ-A-LITE High Vision fluorescents, ELR reduced the lighting energy consumption used by 50%, saving  Regency Travel almost $2,000.00 per year in electrical costs and a payback of only 8 months.

Originally posted 2010-03-13 15:56:31. Republished by Blog Post Promoter

Continental Manufacturing was looking for ways to improve on their poor lighting while lowering their soaring energy costs. By using Viz-A-Lite High Vision fluorescent lamps, Empire Lighting Resources was able to reduce from 4 to 2 T8 lamps in each of the office ceiling fixtures. In the warehouse, they replaced 455 and 1080 watt metal halide fixtures with 192 and 256 watt hi-bay T8 fluorescent reflector fixtures and Viz-A-Lite High Vision fluorescent lamps. Although the warehouse was not air conditioned, the employees working conditions were greatly enhanced due to the reduction of heat discharged from the metal halides. Between the offices and the production/warehouse areas, Continental will save approximately $9,500 per year.

Originally posted 2009-05-02 07:33:47. Republished by Blog Post Promoter

« Older PostsNewer Posts »